I understand how tempting it is to just mount the rifle and start shooting. That’s a rookie mistake I made!
There are many fine adjustments and tweaking you have to do if you want to shoot accurately at different distances and conditions
People that take up target shooting for the first time often have trouble learning how to mount, sight, and adjust their scope.
In case you fall under this category or have experienced the same trouble, this article has all you need to know.
Down below, I’ll be providing information about how to calibrate a scope along with a step-by-step guide on the best way to calibrate it.
With a little practice, you should be able to calibrate a rifle scope by heart!
Contents
What is Rifle Scope Calibration?
Scope calibration is the process of adjusting and aligning your scope, so it lines up with your target.
This process allows your scope’s images to be accurate and distortion-free.
I like to think it’s almost like adjusting the settings of a camera to make sure everything is clear and within the framing that I want!
After doing a few test shots, chances are the bullet did NOT land where you wanted it.
Let’s say if you wanted it right on the bullseye, it might have veered off to the left or right.
Calibrating the rifle scope and adjusting the turrets accordingly help you fix that error. After a few scope adjustments, the bullet will land where you want it!
How to Calibrate a Rifle Scope: Shooting and Testing
Step 1: Visit a Shooting Range
The most effective way to calibrate a rifle scope is to shoot a couple of rounds from several positions and see how things turn out.
You should consider heading to a nearby shooting range if you wish to test and sight in your scope.
Needless to say, you need to prepare in advance by purchasing enough ammunition for the trip and packing safety accessories.
Don’t forget to obey the regulations of the range as well!
Shooting ranges are great places to get your feet wet. I learned a lot during my first time from fellow shooters and instructors!
For an accurate assessment of your scope, you should use a bullseye target that’s specifically designed for zeroing purposes.
If you don’t know WHY your scope is losing zero, then make sure you troubleshoot it to understand the issue.
Step 2: Place Your Rifle on a Rest
To eliminate potential human error, it would be best to place the rifle on a rest.
These are usually available at sporting goods stores and gun clubs, but you can also purchase gun rests online.
In case you are unable to find a gun rest or can’t get one online, you could always use books, bricks, or even your own jacket as substitutes.
As long as you can achieve a stable shooting position, you can pretty much use anything you like.
I personally like using a gun rest bag, or if you don’t have one, you can try using sandbags.
However, using a legitimate gun rest is still the best choice overall.
Step 3: Send Some Rounds Down Range
Once you’re settled at the shooting range, load your rifle and sight in your scope on the target, and shoot it at least 5 times.
Retrieve the target or use a range sight to examine your grouping. After that, make adjustments by rotating the scope turrets, then shoot again.
Keep repeating the process (shoot, check the grouping, and make adjustments) until you can hit the target repeatedly without missing.
I learned the hard way that this is a very trial-and-error step, so don’t get too frustrated!
For optimum results, you should only make as few adjustments as possible.
While different scopes may come with different mechanisms, the principle is usually the same.
Step 4: Move to Different Distances
You probably like to sight in the scope at your primary shooting distance, but it’s not a bad idea to test fire at multiple distances.
The above technique could be used for any distance, but do remember to use a different target for each distance, so you don’t get confused.
In most cases, I usually start at 20 yards and increase the distance after each shooting session.
For optimum results, you should not move more than 50 yards at a time.
If you have the time and patience, you could theoretically go as far as you want.
How to Calibrate a Scope Without Taking a Shot
Scope calibration uses up a lot of ammo, so it’s understandable to worry about wasting ammo.
While you can calibrate a scope without firing a shot, it is not the most ideal because the results will not be optimal.
Of course, you will not know if your rifle is properly calibrated if you do not test it with a shot!
I think it’s more of a last resort. If you must learn these methods, I can teach you two ways to do that.
Using the Barrel of a Bolt Action Rifle
If you’re using a bolt action rifle, you must take the bolt off and see through the barrel to see if everything’s aligned.
Keep the rifle as STABLE as possible, as slight movements may reduce accuracy.
The downside to this process is it only works for very short distances, such as around 50-100 yards.
Use a Collimator or Laser
A collimator is a type of laser beam that points to where the bullet will supposedly land. I say “supposedly” because it is not always accurate.
It lets you theoretically see where the bullet would hit without firing it. From there, you can make the necessary adjustments now that you have a point of reference.
Similar to the first method, it is not very effective except for short ranges.
Why Is Scope Calibration Important?
I think the